main logo

Waveshare Esp32 Display

I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento: 26 aprile 2025
Waveshare
Waveshare
Waveshare ESP32-S3 1.8inch AMOLED Touch Display Development Board, 32-Bit LX7 Dual-Core Processor, 368x448, Accelerometer&Gyroscope Sensor, ESP32 With Display, Support 3.7V Li Battery(NOT Included)
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use
  • Onboard 1.8inch AMOLED display for clear color picture display, 368 x 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard PWR and BOOT programmable buttons for easy custom function development
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery. Onboard 3.7V MX1.25 Lithium battery recharge/discharge header, Support 3.7V Lithium battery(NOT Included)
  • Reserved pads of 7 x GPIO, 1 x I2C, 1 x UART, and 1 x USB interface, for connecting peripherals and debugging. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
  • Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
  • 41,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800x480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Support WiFi, for Esphome/Home Assistant
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • ESP32-S3-Touch-LCD-4.3 is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 4.3inch capacitive touch screen can smoothly run GUI programs such as LVGL
  • Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications
  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 BLE, with onboard antenna
  • Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash. Onboard 4.3inch capacitive touch display, 800×480 resolution, 65K color. Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • 43,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 7inch Capacitive Touch LCD Development Board, ESP32 with Display, 800×480, 5-Point Touch, Up to 240MHz Frequency, Supports WiFi & Bluetooth, for Esphome/Home Assistant Projects
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • [Dual-core Processor] Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • [Onboard Antenna] Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash
  • [7inch Capacitive Touch Display] Onboard 7inch capacitive touch display, 800×480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
  • [Various Peripheral Interfaces] Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications. Supports flexible clock, module power supply independent setting, and other control to realize low power consumption in different scenarios
  • [Supports Flexible Clock] Module power supply independent setting, and other control to realize low power consumption in different scenarios
  • 53,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 5inch Capacitive Touch Display Development Board 800×480 Resolution Screen with 2.4GHz WiFi and BLE 5 Support,32-bit LX7 Dual-core Processor
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • ESP32-S3-Touch-LCD-5,Integrates RGB interface LCD with 5-point capacitive touch, multiple peripheral interfaces
  • IPS Display Panel,Excellent display performance, 178° wide viewing angle *
  • Capacitive 5-point touch, supports touch function with I2C interface, 5-point touch for flexible operation and smooth multi-point UI interaction
  • Supports multiple peripherals, Supports the expansion of multiple peripherals via CAN, RS485, I2C and isolated IO interfaces
  • Support Batch Customization,Support software and hardware customization.Including hardware interface, LOGO, label, case and web page, etc.
  • 49,91 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.47inch LCD Display Development Board, 72×320, 262K Color, Dual-core Processor Up to 240MHz Frequency, Supports WiFi & BLE 5, with Colorful RGB LED, ESP32 with Display
Spedizione gratuita
star

87

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BlE 5 (LE), with onboard antenna
  • Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Onboard 1.47inch LCD display, 172×320 resolution, 262K color
  • Adapting multiple IO interfaces, integrates full-speed USB port Onboard TF card slot for external TF card storage of pictures or files
  • Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
  • Built-in RGB LED with clear acrylic sandwich panel for cool lighting effects
  • ️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-C6 1.47inch Microcontroller Wi-Fi 6 Development Board 160MHz Single-Core Processor 172x320 LCD Screen 262K Color with RGB BLE5 4MB Flash for LVGL GUI Development, etc
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • ESP32-C6-LCD-1.47 is a microcontroller development board with 2.4GHz Wi-Fi 6 and BT BLE 5 support, integrates 4MB Flash. Onboard 1.47inch LCD screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-C6 applications.
  • Equipped with a high-performance 32-bit RISC-V processor with clock speed up to 160 MHz, and a low-power 32-bit RISC-V processor with clock speed up to 20MHz. Supports 2.4GHz Wi-Fi 6 (802.11 b/g/n) and BT 5 (LE), with onboard antenna
  • Built in 320KB ROM, 512KB of HP SRAM, 16KB LP SRAM and 4MB Flash memory. Onboard 1.47inch LCD display, 172×320 resolution, 262K color
  • Adapting multiple IO interfaces, integrates full-speed USB port. Onboard TF card slot for external TF card storage of pictures or files
  • Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios. Built-in RGB LED with clear acrylic sandwich panel for cool lighting effect
  • 19,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.85inch Touch Display Development Board, 360x360, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & BT, Accelerometer & Gyroscope Sensor, ESP32 With Display
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • ESP32-S3-Touch-LCD-1.85 is a microcontroller development board with 2.4GHz WiFi and BT BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 1.85inch LCD display which can smoothly run GUI programs such as LVGL, with capacitive touch function. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.
  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.Onboard audio decoder, Microphone, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc
  • With capacitive touch function controled via I2C interface, with interrupt support. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Adapting UART, I2C and some IO interfaces
  • Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 1.85inch LCD display, 360×360 resolution, 262K color
  • Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
  • 45,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 2.8inch Capacitive Touch Display Development Board, 240x320, IPS, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & BT, Onboard Antenna
Spedizione gratuita
star

77

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
  • Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port
  • Onboard 2.8inch capacitive touch display, 240×320 resolution, 262K color. Onboard speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
  • Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
  • 37,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 7inch Capacitive Touch Display Development Board,ESP32 with 800×480 Resolution 65k RGB 7 inch LCD Screen,5-Point Touch,Supports WiFi & Bluetooth
Spedizione gratuita
star

72

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • ESP32-S3 Development Board onboard 7-inch capacitive touch screen, 800x480 resolution, 65K colors.
  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.Built-in 512KB SRAM and 384KB ROM, with onboard 8MB Flash and 8MB PSRAM.
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna.Support capacitive touch control via I2C interface, 5-point touch with interrupt support.
  • Onboard CAN, RS485, I2C interface, Micro SD card slot and so on, integrates full-speed USB serial port.
  • Support flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.
  • 52,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 2.8inch Capacitive Touch Round Display Development Board, 480x480, 32-Bit LX7 Dual-Core Processor, Supports WiFi & BT, ESP32 With Display
Spedizione gratuita
star

70

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • ESP32-S3-Touch-LCD-2.8C is a microcontroller development board with 2.4GHz WiFi and BT BLE 5 support, integrates high-capacity Flash and P/Static RAM. Onboard 2.8inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications
  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc
  • Onboard 2.8inch capacitive touch display, 480x480 resolution. Supports 2.4GHz Wi-Fi (802.81 b/g/n) and BT 5 (LE), with onboard antenna
  • Supports touch control via I2C interface, with interrupt support. Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB P/Static RAM
  • Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
  • 55,99 € SU AMAZON
waveshare display esp32 display esp32 esp32 display esp32 waveshare waveshare esp32 waveshare display waveshare esp32-s3 touch display esp32 display battery esp32 2028 display esp32 c3 display