Raspberry Pi 5 Sata Adapter
I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento:
26 aprile 2025
Geekworm
Geekworm X1100 2.5" SATA HDD/SSD Shield for Raspberry Pi 5
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【2.5" SATA HDD/SSD Supported】Compatible with 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). The HDD / SSD are NOT included
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Raspberry Pi official power adapter, or Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1100 Shield, 1x Screws Pack accessories
【Matching Case (NOT included)】Refer to X1100-C1 Case ASIN: B0D7VFTHTD
36,89 € SU AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Aluminum NAS Case with ICE Tower Cooler and M.2 SATA SSD Adapter Board,Raspberry Pi 4 Passive Aluminum Case with 4007 Ultra-Quiet PWM Fan for Raspberry Pi 4 Model B 2GB 4GB 8GB
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Compatibile con Raspberry Pi 4 modello B: questa custodia in mattoni in alluminio contiene un dispositivo di raffreddamento a torre ICE e una scheda di espansione SSD M.2 SATA è progettata solo per Raspberry Pi 4 modello B versione 1 GB/2 GB/4 GB/8 GB.
Custodia in alluminio di alta qualità, robusta e durevole, può proteggere bene il Raspberry Pi e proteggere il tuo Raspberry Pi 4 da graffi, polvere e danni.
Con una scheda di espansione SSD M.2 SATA che può espandere lo storage di massa per il tuo Raspberry Pi. Nota: le unità SSD Raspberry Pi 4B e M.2 SATA non sono incluse nella confezione, richiedono un acquisto aggiuntivo. Si prega di prestare attenzione al tipo di unità SSD, deve essere M.2 SATA SSD 2280, la scheda adattatore non supporta SSD NVME.
Buon effetto di dissipazione del calore: con il dispositivo di raffreddamento a torre Raspberry Pi può ridurre rapidamente la temperatura della scheda Raspberry Pi. Diverso dalle normali ventole, questa ventola di raffreddamento supporta la regolazione della velocità PWM, che è perfettamente compatibile con Raspberry Pi OS.
Si consiglia vivamente di utilizzare il sistema operativo Raspberry Pi ufficiale, che può configurare direttamente la ventola per regolare la velocità in base alla temperatura del processore tramite il controllo di configurazione Raspi. Altri sistemi operativi possono obbligarvi a scrivere tu stesso il software e a inviare segnali PWM alla ventola tramite i pin GPIO per controllare la velocità della ventola.
49,99 € SU AMAZON
Geekworm
Geekworm X1005 Dual NVMe SSD Shield Bottom for Raspberry Pi 5, supports Hailo-8 AI Accelerator
Spedizione gratuita
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Raspberry Pi 5 Dual NVMe Hat only compatible with Raspberry Pi 5, Model: X1005
【Support Dual M2 NVMe SSD with multiple length】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
【 Raspberry Pi 5 AI Hat Extension】 Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
【 Support NVMe Boot】 Supports NVMe boot with eeprom 2024/05/17 and later version
【How to Power】 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use Geekworm PD 27W power adapter (ASIN:B0CP8SRXSC) or (ASIN:B0CZCZF2QV)
【Packing List】1 x X1015 PCIe Peripheral Board, 2x 40mm PCIe FFC Cable(One as backup), 1x GPIO Header, 1x Screws Pack (Note: not include Raspberry Pi 5, SSD, TF card or power adapter.)
【Matching Case (NOT include)】Refer to P580-V2 Case (ASIN: B0D99HVX3C). NOT compatible with P580!
40,00 € SU AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD PIP PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Spedizione gratuita
83
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0CTDPVNR6), or P580-V2 (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
18,46 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 with 128GB SSD, M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0 3.0, 800MB/s
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Big Upgrade -> Boost your system to an amazing speed by upgrading memory card (usually read: 100MB/s, write: 10MB/s) to SSD (PCIe 2.0: read: 419MB/s, write: 253MB/s; PCIe 3.0: read: 804MB/s, write: 404MB/s. Tested with this SSD on Raspberry Pi 5). (Note: Raspberry Pi states that PCIe 3.0 may be unstable.)
Comes with 128GB SSD -> M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280.
Two Uses -> Used as system disk or regular hard drive. Provide detailed tutorial. (Download needed, no paper tutorial.)
Easy to Use -> Just tighten the screws and connect the ribbon cable. (Simple configuration needed, see tutorial.)
Compatible models -> Raspberry Pi 5 only. (Note: NOT compatible with any other Raspberry Pi models.)
34,42 € SU AMAZON
GeeekPi
GeeekPi N10 Tiny NVMe SSD Adapter Board for Raspberry Pi 5
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【Compatibility】The adapter board is compatible with Raspberry Pi 5 & M2 NVMe SSD 2230/2242 for fast M.2 NVME storage, leveraging its advanced features and connectivity options to deliver enhanced storage performance; it is fully compatible with Raspberry Pi OS, ensuring seamless integration and reliable operation without without in the Raspberry Pi epoca Cosystem.
【Installazione plug-and-play】Progettato per semplicità e convenienza, la scheda adattatore offre funzionalità plug-and-play, consente agli utenti di installare rapidamente e configurare NVMe SSD storage senza bisogno di procedure complesse.
【M-key Slot Compatibility】The adapter board is designed to accommodate M.2 NVMe SSDs with M-key slots, ensuring a secure and stable connecection between the SSD and the Raspberry Pi 5.
Supporto a forma di fattore: il supporto per tavolo misura sia i fattori di forma 2242 e 2230, referring to the dimensions of the SSD. Questo significa che può accogliere SSD che sono lunghi 22 mm e lunghi 40 mm (2242) o 22 mm larghi e 30 mm lunghi (2230).
【High Speed Connectivity】Equipped with PCIe Gen3 x4 interface, the adapter board ensures efficient data transfer between the NVMe SSD and the Raspberry Pi 5, delivering rapid access to stored data and improving overall system performance.
【Wiki】https://wiki.52pi.com/index.php?title=EP-0229
14,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579-V2) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1000 / M901 / M300 / M400 & Raspberry Pi 5 Active Cooler
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN: B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, X1000/X1001 M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
√ P579 Case with Official Raspberry Pi 5 official active cooler, refer to ASIN: B0CT4P893Q; √ P579 Case with H501 active cooler, refer to ASIN: B0D5LCJQZ5
13,88 € SU AMAZON
GeeekPi
GeeekPi Case for Raspberry Pi 5 with 27W Power Supply, Pi 5 Case with Heatsink Fan and PD Adapter USB C 5V 5A Power Adapter for Raspberry Pi 5 16GB 8GB 4GB
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Compatibility - GeeekPi Case with Power Supply is is designed for Raspberry Pi 5 4GB/8GB/16GB board. NOTE: Raspberry Pi 5 Board is not included.
Pi 5 Case - GeeekPi Raspberry Pi 5 Case is made of lightweight ABS material. The removable top cover design can access to GPIO and camera connectors easily. It can accurately access to all ports, including usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot and power button.
Armor Lite V5 Cooler - Pi 5 Armor Lite V5 Cooler combines aluminum heatsink and PWM fan. Different from ordinary fans, the PWM fan supports PWM speed regulation, which is perfectly compatible with Raspberry Pi OS. With 3510 ultra-quiet cooling fan and thermal pads, it can lower the temperature of Raspberry Pi Board quickly.
Power Delivery Support - The adapter is equipped with Power Delivery technology, allowing for fast and efficient charging of compatible devices.
Universal Compatibility - With an input voltage range of 100-240V and a frequency of 50/60Hz, this adapter is suitable for use worldwide, making it a travel-friendly power solution.
Package Includes - 1x ABS Case for Raspberry Pi 5, 1x Armor Lite V5 Cooler for Raspberry Pi 5, 1x Thermal Pads Pack, 1x Screw Pack, 1x Screw Driver, 1x Power Supply for Raspberry Pi 5
23,99 € SU AMAZON
Waveshare
Waveshare PCIe To M.2 Adapter For Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing
Spedizione gratuita
67
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Connecting To PI5 Via 16PIN Cable: Based On 16PIN PCIe Interface Of Raspberry Pi 5
NVMe Drive Protocol Support:Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive
Onboard Dual LED Indicators: Easy To Monitor The Working Status
Onboard Power Monitoring Chip And EEPROM: Real-Time Monitoring Of Solid State Drive Power Status For More Stable Operation
Reserved Airflow Vent For Cooling Fan: Better Cooling Effect For Pi5 And Solid State Drive
16,99 € SU AMAZON
raspberry pi 5 ssd sata adapter
raspberry pi 5 sata
raspberry pi sata adapter
sata raspberry pi 5
raspberry pi 5 kit sata
raspberry pi 5 pci sata
raspberry pi 5 sata hat
raspberry pi 5 sata hdd
raspberry pi 4 sata adapter
raspberry pi 5 sata 3.5
#1 VINCITORE
