main logo

Oscilloscopio Fnirsi

I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento: 28 aprile 2025
FNIRSI
FNIRSI
FNIRSI Oscilloscopio 1014D - 2 in 1 generatore di segnale DDS dell'oscilloscopio digitale, 2 canali 100Mhz
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Fnirsi L'oscilloscopio ha una frequenza di campionamento in tempo reale fino a 1 GSA/S e una larghezza di banda analogica di 100 MHz * 2. L'oscilloscopio Fnirsi può essere attivato da singolo/normale/automatico, può essere utilizzato liberamente sia per segnali analogici periodici che per segnali digitali aperiodici
  • Generatore di segnale funzione DDS: uscita di taglio 2,5 VPP, i passi di frequenza del segnale sono 1 HZ, supporta 14 tipi di segnali di funzione e un segnale di taglio personalizzabile, che può memorizzare fino a 1000 segnali di taglio personalizzati
  • Facile misurazione: funzione di misurazione del cursore, quando si leggono manualmente i parametri di ampiezza e frequenza, non è necessario leggere l'unità di scala di sfondo e la quantità, e si può ottenere direttamente il valore e la frequenza da picco a picco senza conversione
  • Facile da osservare: dotato di un pulsante automatico ad alta efficienza, trigger adattivo 25%, 50%, 75%, in grado di visualizzare la forma d'onda misurata senza ingombranti regolazioni; il display è dotato di uno schermo LCD ad alta definizione da 7 pollici con risoluzione 800 x 480
  • Display grafico Lissajous e visualizzazione FFT: La funzione di visualizzazione grafica Lissajous può essere utilizzata per confrontare l'ampiezza, la frequenza e la fase dei due set di segnali. La funzione di visualizzazione FFT può stimare approssimativamente il contenuto armonico del segnale
  • 338,88 € SU AMAZON
YuqiaoTime
YuqiaoTime
YuqiaoTime FNIRSI-1014D Desktop Oscilloscope 100MHZ*2 1GS/s 2 in 1 Dual Channel Digital Oscilloscope 10MHZ Signal Generator
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Features: Built in DDS signal generator, support 12 kinds of function signal. Capture output signal function, which can store up to 1000 capture signals. Targeted high intelligent decoding algorithm, the encoderlifeis infinite, and intelligent anti-burn function, 1X Can withstand up to 400V withstand voltage. With 100MHz * 2 ana-log bandwidth and @ 1GSa/s sampling rate(1X = 5MHz, 10X = 100MHz).
  • Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast. High measurement voltage range: 1X can measure 0~40 V, 10X can measure 0~400V. Up to 12 parameters measurement:VPP,VP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty+,Duty-,Time+,Time-,Period. Cursor measurement function: it is convenient to manually measure the period and frequency and voltage.
  • Complete triggering function (single, normal, automatic), and at any time, the waveform display (pause function) is frozen. Equipped with high efficiency One-button AUTO, and one-button waveform storage and screenshot function. Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data. Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.
  • Equipped with a USB interface, which can be connected to a com-puter to share its screenshots with the com-puter, which is convenient for secondary analysis. Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals. FFT display function, can analyze the spectral characteristics of the signal, memory compression technology, waveform refresh screen does not flicker.
  • Material: ABS Ana-log band width: 100MHz * 2 Number of channels: 2 channels Maximum real time sampling rate: 1GSa/s Vertical sensitivity: 50 mV/div ~ 500 V/div Horizontal time base range: 50S/div ~ 10nS/div Maximum test voltage: 40 V (1X probe), 400 V (10X probe) Storage depth: 240Kbit
  • 206,00 € SU AMAZON
QDTimes
QDTimes
QDTimes Oscilloscope FNIRSI-1C15 Professional Digital Oscilloscope 500MS/s Sampling Rate 110MHz Analog Bandwidth Support Waveform Storage
star

93

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • FNIRSI-1C15 is a fully functional, practical and cost-effective handheld oscilloscope newly launched by FNIRSI. The real-time sampling rate is 500M, and the analog bandwidth is 110MHz.
  • In addition to all the functions of a conventional handheld oscilloscope, we also added a one-key quick auto function on this basis, so you can easily grasp the waveform like a desktop computer. We have added 1k Hz self-test square wave for FNIRSI-1C15, and the storage depth has been upgraded to 12kpts.
  • With reference to the waveform, you can pause at any time to save the previous frame waveform to the screen, and you can compare it with the currently refreshed waveform. Afterglow and scroll modes make it easier to detect and record waveforms.
  • Built-in 3000mAH rechargeable battery, it can work continuously for more than 10 hours after fully charged. The body is equipped with a high-quality silicone sleeve, which is non-slip and anti-drop. The joystick replaces the original arrow keys, making the operation simpler and more effective
  • Product parameters: Model : FNIRSI-1C15 Number of channels : 1 Screen size : 2.4 inches Screen Resolution : 320*240 Analog bandwidth : 110M Sampling Rate : 500M 1k Hz self-checking square wave: Stand by Rise Time : <3ns Storage depth : 12 Kpts Time base range : 5ns-10s Vertical sensitivity : 20mv/div-100v/div Trigger mode : Auto/Normal Trigger type : Rising/Falling
  • 108,07 € SU AMAZON
YuqiaoTime
YuqiaoTime
YuqiaoTime FNIRSI DPOX180H Handheld Dual Channel Digital Oscilloscope 180MHz-3DB 2 In 1 Function Signal Generator Fluorescence Display ZOOM
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • DPOX180H is a cost-effective handheld dual-channel digital phosphor oscilloscope launched by FNIRSI with a two-in-one oscilloscope and signal generator. The oscilloscope has a real-time sampling rate of 500MSPS and an analog bandwidth of 180MHz. In terms of display, a high-contrast 2.8-inch IPS full-vision LCD screen and digital fluorescent technology are used.
  • The waveform display effect is good, and the colorways are grayscale and color temperature. With a waveform refresh rate of up to 50000wfm/s, displaying abnormal signals with low probability is easier. The time base system includes a ZOOM time base for easy analysis of digital protocol signals. With a vertical sensitivity as low as 5mV, it can better measure small signals of 5mVPP.
  • Ultra-high signal-to-noise ratio, fully sealed shielding measures, stable circuit feedback design, clean and clear waveform. The original adjustable automatic bandwidth limit and adaptive adjustable trigger suppression are suitable for analyzing and measuring signals with relatively large noise. 20M hardware bandwidth limit, can filter out noise above 20MHz.
  • The trigger adopts digital trigger technology with high precision. It has three trigger modes: automatic/single/normal. It has a strong ability to capture periodic signals, burst signals, and protocol signals. The DDS signal generator has 14 kinds of function signal waveforms and a free-customized chopping waveform. The frequency of the sine wave can reach up to 20MHz, and the other waveforms can reach up to 10MHz.
  • It has three-time base modes of YT, XY, and rolling. Manual cursor measurement is suitable for measurements with large noise signals. Efficient one-button automatic adjustment, adaptive 25%, 50%, and 75% electric level trigger only take 2 seconds to measure 1VPP/1KHz. Save waveforms and screenshots with one key, up to 250 sets of waveform data or 90 pictures can be stored, and 500 intercepted wave data can be stored at the same time.
  • 161,89 € SU AMAZON
QDTimes
QDTimes
QDTimes Oscilloscope FNIRSI DPOX180H Handheld Dual Channel Digital Oscilloscope 180MHz-3DB 2 In 1 Function Signal Generator Fluorescence Display ZOOM
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • DPOX180H is a cost-effective handheld dual-channel digital phosphor oscilloscope launched by FNIRSI with a two-in-one oscilloscope and signal generator. The oscilloscope has a real-time sampling rate of 500MSPS and an analog bandwidth of 180MHz.In terms of display, a high-contrast 2.8-inch IPS full-vision LCD screen and digital fluorescent technology are used.
  • The waveform display effect is good, and the color ways are grayscale and color temperature. With a waveform refresh rate of up to 50000wfm/s, it is easier to display abnormal signals with low probability. The time base system includes a ZOOM time base for easy analysis of digital protocol signals. With a vertical sensitivity as low as 5mV, it can better measure small signals of 5mVPP.
  • The original adjustable automatic bandwidth limit and adaptive adjustable trigger suppression are suitable for analyzing and measuring signals with relatively large noise. 20M hardware bandwidth limit, can filter out noise above 20MHz. The trigger adopts digital trigger technology with high precision. It has three trigger modes: automatic/single/normal. It has a strong ability to capture periodic signals
  • The frequency of the sine wave can reach up to 20MHz, and the other waveforms can reach up to 10MHz. The original chopping output function can store up to 500 customized signals. It has three time base modes of YT, XY and rolling. Manual cursor measurement is suitable for measurements with large noise signals. Efficient one-button automaticadjustment, adaptive 25%, 50%, 75% electric level
  • it only takes 2 seconds to measure 1VPP/1KHz. Save waveforms and screenshots with one key, up to 250 sets of waveform data or 90 pictures can be stored, and 500 intercepted wave data can be stored at the same time. The data browser can browse and view the currently saved waveform data and pictures, and the waveform data supports operations such as zooming and moving. High voltage anti-burning protection, all gears can withstand high voltage up to 400V. USB data export
  • 230,08 € SU AMAZON
QDTimes
QDTimes
QDTimes Oscilloscope FNIRSI DSO-TC2 Handheld Oscilloscope Transistor Detector Digital Oscilloscope LCR Meter Resistance Meter Capacitance Meter (DSO-TC2)
star

66

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • FNIRSI-TC2 ingeniously integrates a digital oscilloscope, electronic component tester, PWM signal generator, and other functions into one. Equipped with large-size color dot matrix TFT display.Built-in rechargeable lithium battery. Bring more practical functions to users with a small size, Also has good portability.
  • FNIRSI-TC2 has various working modes such as oscilloscope and component tester. Each time you click the power button, it will enter the mode selection interface. Press the [Up] and [Down] keys of the direction keys to select, Select the “Mos Test” item, and press【OK】key to enter component tester mode; Select the “Oscilloscope” item, press 【OK】key to enter the oscilloscope mode.
  • "Mos Test" mode can test various types of transistors, and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance; can test capacitance, resistance, inductance components, etc. FNIRSI-TC2 is especially suitable for the fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small batch components.
  • "Oscilloscope" mode to test the signal waveform of the circuit. Support online operation with a computer, you can refresh the official firmware by yourself and complete the upgrade. It is hoped that FNIRSI-TC2 can make the study and work of the majority of users more efficient and interesting
  • 83,85 € SU AMAZON