Nvme Raspberry Pi4
I 10 migliori prodotti di dicembre 2025
Ultimo aggiornamento:
13 dicembre 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75 / B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Argon Forty
Argon ONE M.2 NVME Scheda di espansione per Raspberry Pi 4 | Supporta SSD M-Key M.2 NVME | Compatibile solo con custodie Argon ONE V2
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Scheda di espansione Argon ONE più veloce con slot M.2 NVME SSD (M-Key)
Maximize Pi4 con SSD M.2 NVME. Plug and Play M.2 NVME SSD in Argon One Case
Compatibile con Argon One V2 Case con Raspberry Pi Raspberry Pi 4 Modello B 1 GB / 2 GB / 4 GB / 8 GB.
Con supporto UASP per Raspberry Pi 4 per massimizzare la velocità di trasferimento dell'unità M.2 NVME. fino a 10 Gbit. PS supporta anche TRIM.
Funziona meglio con Raspberry OS, Kodi, LibreElec, Ubuntu, Retropie e altri sistemi operativi basati su Debian
47,49 € SU AMAZON
GeeekPi
GeeekPi Metal Case for Raspberry Pi 5,with N04 M.2 NVMe SSD PCIe Peripheral Board,Official Active Cooler and 27W USB C Power Adapter for Raspberry Pi 5 8GB 4GB
16% Sconto
94
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
【Compatibility】This kit includes a metal case, a N04 M.2 Key-M NVMe SSD PCIe Peripheral Board,and an official active cooler and a PD 27W Power Adapter; It is compatible with the latest Raspberry Pi 5 4GB/8GB and Supports M.2 NVMe SSD 2230 2242 2260 2280.
【Access to all Ports】GeeekPi Raspberry Pi 5 Case can accurately access most ports of Raspberry Pi board, including usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, and GPIO Slot.
【N04 M.2 NVMe to PCIe Adapter Included】N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no soldering required.
【Raspberry Pi 5 Active Cooler Included】Raspberry Pi 5 Active Cooler combines an aluminium heatsink with a PWM fan to keep your Raspberry Pi 5 maintain optimal operating temperatures, ensuring reliable performance for various applications.
【Raspberry Pi 5 Power Supply Included】5.1V 5A 27W USB C power Supply is designed for Raspberry Pi 5 board. The power adapter is equipped with Power Delivery technology, allowing for fast and efficient charging of compatible devices. It also offers a variety of output voltage options, including 5.1V at 5A, 9.0V at 3.0A, 12.0V at 2.25A, and 15.0V at 1.8A, providing flexibility for different device requirements.
41,98 € SU AMAZON
GeeekPi
GeeekPi Custodia in metallo con scheda periferica N07 M.2 NVMe SSD Pip PCIe inferiore per Raspberry Pi 5, con raffreddamento attivo ufficiale Raspberry Pi 5
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Compatibilità: questo kit include una custodia in metallo e una scheda periferica N07 M.2 PCIe a NVMe Bottom SSD Pip PCIe e un dispositivo di raffreddamento attivo ufficiale. È compatibile con il più recente Raspberry Pi 5 4 GB/8 GB e supporta M.2 NVMe SSD 2230 2242 2260 2280. La custodia in metallo è compatibile anche con la base X1002 o Pimoroni NVMe.
Facile accesso a Pi 5: la custodia in metallo GeeekPi N07 può facilmente accedere al jack di alimentazione Raspberry Pi 5 USB-C, porte micro HDMI, porte USB, Ethernet jack, slot per schede SD, pulsante di alimentazione, ecc.
【Raspberry Pi 5 Active Cooler included】Supporta l'installazione attiva di Raspberry Pi 5, insieme con fori di raffreddamento ben realizzati per garantire una dissipazione efficiente del calore. NO Active Cooler Kit, ASIN: B0DL5W15RD
Contenuto della confezione: 1 custodia in metallo per Raspberry Pi 5,1 X Official Raspberry Pi 5 Active Cooler, 1 X N07 PCIe M.2 Key-M NVMe SSD PCIe periferico PCIe, 2 cavi FPC, 1 X Screwdriver, 1 X Screw Pack
Nota: non include Raspberry Pi 5, M.2 NVMe SSD o adattatore di alimentazione.
33,58 € SU AMAZON
ElectroCookie
ElectroCookie Scheda HAT SSD PCIe a M.2 NVMe per Raspberry Pi 5 (X1001)
83
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Prestazioni di sistema potenziate – Elaborazione dei dati e tempi di risposta più rapidi, ideale per progetti che richiedono storage ad alta velocità, con opzioni di storage estese.
Supporto SSD M.2 Key-M NVMe - Progettato per Raspberry Pi 5, questo HAT M.2 supporta le dimensioni SSD NVMe 2230, 2242, 2260 e 2280 e include un supporto per pilastro in rame per un'installazione sicura SSD 2230, 2242 e 2260.
Completamente compatibile con ElectroCookie case B0DLWKVQGT e refrigeratore B0DLWQ44H5.
Fonte di alimentazione: lo scudo SSD viene alimentato direttamente attraverso il nastro PCIe FFC; utilizzare un adattatore di alimentazione PD 27W per Raspberry Pi 5.
Lista di imballaggio: include 1 x M.2 NVMe SSD HAT Board, 1 x pacchetto di componenti di montaggio; Nota: Raspberry Pi 5, unità SSD e adattatore di alimentazione non sono inclusi.
18,26 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (with 128GB SSD), M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 128GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
VEDI SU AMAZON
Waveshare
Waveshare PCIe To M.2 Adapter Board (C) For Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing, With Transparent Acrylic Mounting Plate, Side-Mounting Solution
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Designed for Raspberry Pi 5. Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing, Improves Working Efficiency
Connecting To PI5 Via 16PIN Cable. Based On 16PIN PCIe Interface Of Raspberry Pi 5. Onboard Dual LED Indicators. Easy To Monitor The Working Status
Comes With Transparent Acrylic Mounting Plate. Adopts Side-Mounting Solution To Save Space Above The Raspberry Pi 5
NVMe Drive Protocol Support. Compatible With 2230 / 2242 / 2260 / 2280 Size M.2 Solid State Drive. Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive
Multiple Power Supply Methods. Supports Power Supply Via PCIe Cable Or 3PIN Cable(* Note: uses PCIe cable for power supply by default, you can add 3PIN cable in cases of insufficient power)
15,99 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 (with 256GB SSD), M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 256GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
36,95 € SU AMAZON
Geekworm
Geekworm X1000 M.2 Key-M NVMe SSD PIP PCIe Peripheral Board for Raspberry Pi 5
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【Compatibility】for Raspberry Pi 5 8GB/ 4GB / 2GB/1GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242 length installation. (Do not reserve the nut column to fix the 2230 SSD) 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1000#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1000 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1000 PCIe Peripheral Board, 1x Screws Pack Accessories
【Matching Case(NOT included)】Refer to Geekworm P579 (ASIN: B0CRB3DT5M), or P579 Case with Active Cooler (ASIN: B0CT4P893Q)
13,00 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 Adapter Board (D), Compatible with Raspberry Pi 5, Supports 2280/2260 / 2242/2230 Size NVMe Protocol M.2 SS Solid State Drive, High-Speed Reading/Writing NVMe Adapter
69
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
✅【Connecting To PI5 Via 16PIN Cable】Based On 16PIN PCIe Interface Of Raspberry Pi 5
✅【NVMe Solid State Drives Support】Compatible With 2280 / 2260 / 2242 / 2230 Size M.2 Solid State Drives. Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive
✅【NVMe Drive Slot Support】Note: Only supports the NVMe Protocol Solid State Drives.
✅【Improves Reading/Writing Speed Of Your Pi】Faster Reading/Writing Speed Compared To The TF Card Slot Of Raspberry Pi, 8Gbps Data Rate, Greatly Improving Reading/Writing Efficiency Of The System Or Files, Supports Booting Pi5 From NVME Solid State Drive.(As Raspberry Pi does not support booting from NVME by default, you need to modify it to realize it.)
✅【Two Power Supply Methods】Supports Power Supply Via PCIe Cable Or 3PIN Cable * Note: uses PCIe cable for power supply by default, you can add 3PIN cable in cases of insufficient power
✅【Onboard Dual LED Indicators】Easy To Monitor The Working Status
❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
16,99 € SU AMAZON
#1 VINCITORE
