main logo

Hat Raspberry Pi

I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento: 26 aprile 2025
Geekworm
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • 【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
  • 【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
  • 【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
  • 【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
  • 【Packing List】1 x X1001 Shield, 1x Accessories Pack
  • 16,40 € SU AMAZON
Waveshare
Waveshare
Power over Ethernet (PoE) HAT per Raspberry Pi 4B / 3B+, Standard 802.3af/at PoE Rete, 5V USB-A e 12V Uscite Header, Ventola di Raffreddamento HAT PoE Integrata e Chip Buck MP8676, Isolato
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • 【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
  • 【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
  • 【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
  • 【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
  • 【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
star

94

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • 77,99 € SU AMAZON
IBest
IBest
IBest Ethernet/USB HUB Hat for Raspberry Pi 4 B/3 B+/3 B/2 B/Zero/Zero W/Zero WH/Zero 2W Expansion Board, 1x RJ45 Ethernet Port,3X USB Ports Compatible with USB2.0/1.1
Spedizione gratuita
star

88

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • This is a Ethernet / USB HUB HAT for various versions of the Raspberry Pi, including Raspberry Pi 3 Model B+/ B, 2 Model B,and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH.
  • The Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection.
  • 3x USB ports, compatible with USB2.0/1.1
  • 1x RJ45 10/100M port, based on the RTL8152B Ethernet chip
  • Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port
  • 20,89 € SU AMAZON
Geekworm
Geekworm
Geekworm Raspberry Pi 5 Case (P579-V2) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1000 / M901 / M300 / M400 & Raspberry Pi 5 Active Cooler
Spedizione gratuita
star

83

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • 【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN: B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 8GB / 4GB Motherboard
  • 【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
  • 【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
  • 【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
  • 【NOTE】NOT include Raspberry Pi 5 motherboard, X1000/X1001 M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
  • √ P579 Case with Official Raspberry Pi 5 official active cooler, refer to ASIN: B0CT4P893Q; √ P579 Case with H501 active cooler, refer to ASIN: B0D5LCJQZ5
  • 13,88 € SU AMAZON
Geekworm
Geekworm
Geekworm Raspberry Pi 4 Case, Raspberry Pi Universal HAT Size Case DIY Kit, Acrylic Case for Raspberry Pi 5 / Raspberry Pi 4B / 3B+ / 3B / 2B and Raspberry Pi Hat Expansion Board
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • It is a universal acrylic case DIY kit to install raspberry pi hat expansion board with Raspberry Pi 5 / Raspberry Pi 4 / 3B+ / 3B together.
  • This is a Protection solution for non-standard boards running boards on top of the raspberry pi, but Please note, this case only compatible with those board which are fitted with the raspberry pi hat, and please check the size of the case carefully to make sure that it will meet your need.
  • Compatible with Raspberry Pi 4 Model B/ Pi 3 Model B+ / Pi3 Model B/ 2B / B+ and Pi Hat expansion board (Like X708 UPS/X728 UPS).
  • Packing List: 1 x Acrylic Case; 1 x Pack of Screws. (The raspberry pi or the expansion board is not included)
  • 8,89 € SU AMAZON
Raspberry Pi
Raspberry Pi
M.2 HAT+ pour Raspberry Pi 5                    
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7
KEYESTUDIO
KEYESTUDIO
KEYESTUDIO Respeaker 2-Mic Pi Hat v1.0 per Raspberry Pi 4 Module Zero e Zero W, Raspberry Pi B +, Raspberry Pi 2B e 3B/4B
Spedizione gratuita
star

74

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • This is keyestudio respeaker 2-mic pi cappello V1.0 scudo progettato per ai e applicazioni vocali. Si tratta di una bassa potenza stereo Codec basato sul wm8960.
  • Ci sono due microfoni sullo scudo per il suono Collection, tre apa102 RGB LED, pulsante di un utente e due connettori Grove per estensione di applicazione.
  • Inoltre, un jack audio da 3.5 mm o XH2.54-2P altoparlante di uscita può essere usato per l' uscita audio.
  • Con questo prodotto Shield, è possibile costruire una voce più potente e flessibile che si integra Amazon amazona servizi voce, Google Assistant, e molto altro ancora
  • Supporto tecnico: schema di collegamento, codice di esempio, utilizzando il metodo e le risorse sono forniti nella nostra pagina Wiki. L' assistenza tecnica è disponibile tramite e-mail o messaggio
  • 12,95 € SU AMAZON
Waveshare
Waveshare
Waveshare PCIe to 2-CH M.2 HAT+ Adapter Type B Compatible with Raspberry Pi 5, Support 2280/2260 / 2242/2230 Size NVMe Protocol M.2 SS Solid State Drive High-Speed Reading/Writing NVMe HAT
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • PCIe To 2-Ch M.2 Adapter Type B For Raspberry Pi 5, Compatible With 2280 / 2260 / 2242 / 2230 Size NVMe Protocol M.2 Solid State Drive , 5Gbps Data Rate, High-Speed Reading/Writing, Raspberry Pi 5 NVMe HAT.Adopts Anti-Oxidation Immersion Gold Process
  • ✅【Connecting To PI5 Via 16PIN Cable】Based On 16PIN PCIe Interface Of Raspberry Pi 5
  • ✅【Dual NVMe Solid State Drives Support】Compatible With 2280 / 2260 / 2242 / 2230 Size M.2 Solid State Drives Supports PCIE X1 Gen2 Only, Supports Booting PI5 From Solid State Drive
  • ✅【NVMe Drive Slot Support】Note: Only supports the NVMe Protocol Solid State Drives.
  • ✅【Improves Reading/Writing Speed Of Your Pi】Faster Reading/Writing Speed Compared To The TF Card Slot Of Raspberry Pi , Greatly Improving Reading/Writing Efficiency Of The System Or Files, Supports Booting Pi5 From NVME Solid State Drive.(As Raspberry Pi does not support booting from NVME by default, you need to modify it to realize it.)
  • ✅【Onboard Dual LED Indicators】Easy To Monitor The Working Status. 【Onboard Power Monitoring Chip And EEPROM】Real-Time Monitoring Of Solid State Drive Power Status For More Stable Operation
  • ❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
  • 27,99 € SU AMAZON
Miuzei
Miuzei
Miuzei Raspberry Pi 5 Case Support Top PCIe M.2 NVMe SSD Hat and Active Cooler Metall Aluminium Case for Raspberry Pi 5 4GB/8GB Support X1001 X1000 X1003 Hats Gray
Spedizione gratuita
star

69

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Compatibilità: Miuzei MC73 Metal Case ① Support Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like :X1003 X1000 X1001 X1004 ALL Expansion Board at the Top ② Support separate Raspberry Pi 5 8GB / 4GB Motherboard ③ Support Official Raspberry Pi 5 Active Cooler (non incluso) ④ Supporto Miuzei raffreddamento Corpo: Asia B0CTMFH133 (non incluso)
  • Design compatto: il coperchio superiore della custodia in alluminio è realizzato in acrilico trasparente di alta qualità, che non solo previene efficacemente l'interferenza del segnale WiFi da parte dell'alloggiamento in metallo, ma rende anche chiaramente visibile lo stato di lavoro del Raspberry Pi 5; allo stesso tempo, le aperture laterali aiutano a dissipare il calore più velocemente
  • Raffreddamento significativo: la custodia in alluminio Raspberry Pi 5 è realizzata in lega di alluminio di alta qualità per una protezione durevole, e il processo di placcatura rende la custodia lucida e testurizzata, e con il dispositivo di raffreddamento attivo, il Raspberry Pi 5 è in grado di correre ad alte velocità anche quando i dispositivi di espansione multipli sono utilizzati allo stesso tempo
  • Facile accesso a tutte le porte: il case Miuzei Raspberry Pi 5 offre un accesso preciso alla porta GPIO, micro HDMI, porta di alimentazione USB-C, presa Ethernet, slot per schede SD, pulsante di alimentazione, porta MIPI DSI/CSI e altro ancora
  • Contenuto della confezione: 1 custodia in metallo MC73 per Raspberry Pi 5 8 GB/4 GB, 1 manuale utente (lingua italiana non garantita), 1 4 cuscinetti in gomma; 1 x Screws Pack Accessories Nota: non include Raspberry Pi 5, M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Original Active Cooler, Miuzei dissipatore di calore: asin B0CTMFH11 33
  • 14,99 € SU AMAZON
raspberry pi hat hat raspberry pi 5 raspberry pi hat ssd raspberry pi ups hat ups hat raspberry pi hat raspberry pi 4 raspberry pi 4 hat raspberry pi dac hat raspberry pi hat adc raspberry pi hat sata