main logo

Esp32 Pico

I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento: 27 aprile 2025
Waveshare
Waveshare
ESP32-C6 Microcontrollore Scheda di Sviluppo Integrato WiFi 6, Bluetooth 5 e IEEE 802.15.4 (Zigbee 3.0&Thread), Adotta ESP32-C6-MINI-1 Chip, 160MHz Processore Single-core
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • ESP32-C6 RISC-V microcontroller development board integrating WiFi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread), compatible in size and interface with most of the Raspberry Pi Pico HATs, supports ESP-IDF, Arduino
  • ESP32-C6 WiFi 6 development board adopts ESP32-C6-MINI-1 chip with RISC-V 32-bit single-core processor, capable of running at 160 MHz, Integrated 320KB ROM, 512KB HP SRAM, 16KB LP SRAM and 4MB flash, suitable for AIoT applications
  • Onboard MP28164 high efficiency DC-DC buck-boost chip with load current up to 2A, ensuring the safety of the product
  • 20 × multi-function GPIO pins and 7 × expanded IO pins, configurable pin function, allows flexible development and integration
  • Rich peripheral interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM, etc. to achieve various functions flexibly
  • 13,59 € SU AMAZON
Waveshare
Waveshare
Waveshare Industrial 6-Channel ESP32-S3 WiFi Relay Module, Onboard RS485 / Pico HAT Interfaces, With Multiple Isolation Protection Circuits, Industrial-Grade, Rail-Mount Case
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Built in buzzer, RGB colorful LED, power supply and RS485 TX/RX indicators for monitoring the operating status of the module
  • Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance. High quality relay, contact rating: ≤10A 250VAC/30VDC. Onboard isolated RS485 interface, for connecting to various RS485 Modbus industrial modules or sensors. Onboard USB Type-C port for power supply, firmware downloading and debugging
  • Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications. Onboard digital isolation to prevent interference from external signal
  • Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay. Rail-mounted ABS case, easy to install, safe to use
  • Onboard 40PIN header compatible with some Raspberry Pi Pico HAT, for expanding more functions such as RTC / CAN / RS232 / LoRa / sensor, etc. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal
  • 43,99 € SU AMAZON
Waveshare
Waveshare
Waveshare DALI2 Expansion Module for ESP32-Pico Series Boards, Supports DALI Communication for Customized Control of Multiple Lighting Groups
Spedizione gratuita
star

94

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • Suitable for ESP32-C6-Pico / ESP32-S3-Pico development boards, supports sending DALI signals to lighting source controllers and achieving customized control of multiple lighting groups
  • Compatible with Pico interface, based on the ESP32-C6-Pico header, suitable for ESP32-C6-Pico / ESP32-S3-Pico
  • Onboard DALI communication screw terminal for connecting external DALI devices
  • Comes with examples for ESP32-S3 / ESP32-C6, enabling customized control through simple modifications
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 12,99 € SU AMAZON
Freenove
Freenove
Freenove I2C IIC LCD 1602 Module, New Type TWI Serial 16x2 Display, Compatible with Arduino Raspberry Pi Pico ESP32 ESP8266
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • LCD 1602: This module can display 2 lines of characters, with 16 characters per line
  • I2C / IIC Interface: Saves a lot of ports compared to parallel interface (This new model integrates the conversion circuit, making it more stable)
  • Detailed Tutorial: Provides step-by-step guide and detailed explanations (The download link can be found on the product box) (No paper tutorial)
  • Compatible Models: Compatible with mainstream models of Arduino / Raspberry Pi / Raspberry Pi Pico / ESP32 / ESP8266, with example project and code (Other controllers are also compatible but without examples)
  • Get Support: Our technical support team is always ready to answer your questions
  • 8,95 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 Mini Development Board, Based On ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, 2.4GHz Wi-Fi & BT 5, Castellated Module, Suitable for SMD Applications
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Equipped with 32-bit LX7 dual-core processor, up to 240MHz main frequency.Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE)
  • Built in 512KB of SRAM and 384KB ROM, onboard 4MB Flash memory and 2MB PSRAM. 4 x SPI, 2 x I2C, 3 x UART, 2 x I2S, 2 x ADC, etc
  • Castellated module and onboard ceramic antenna, allows soldering direct to carrier boards
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • Integrated with USB serial port full-speed controller, 34 x GPIO pins allows flexibly configuring pin functions
  • 11,90 € SU AMAZON
DUBEUYEW
DUBEUYEW
DUBEUYEW ESP32 ESP32-C3 Scheda di Sviluppo Mini ESP32 C3 Supporta WiFi Bluetooth Compatibile con Arduino (4 pezzi)
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • Chip Wi-Fi e Bluetooth dual-mode a basso consumo, dotato di processore single-core RISC-V a 32 bit, frequenza principale fino a 160 MHz
  • ESP32-C3 può essere sviluppato utilizzando il framework di sviluppo ESP-IDF, inclusi ambienti di sviluppo tradizionali come MicroPython e Arduino. Il prodotto è adatto per Internet delle cose, case intelligenti, reti di sensori e altri campi, con buona scalabilità e ampio supporto software.
  • ESP32-C3 Supporta Wi-Fi a 2,4 GHz (802.11 b/g/n) e BT 5 (LE), ha 400 KB di SRAM integrata e 384 KB di spazio di archiviazione ROM e 4 MB di memoria Flash integrata
  • Integrato con il controller a piena velocità della porta seriale USB, 15 pin GPIO consentono di configurare in modo flessibile le funzioni dei pin
  • Il design compatto dell'ESP32-C3 consente un'elevata integrazione di WiFi e Bluetooth a 2,4 GHz. Risparmia energia e spazio.
  • 20,99 € SU AMAZON
Teensy
Teensy
ESP32-PICO-KIT Development Board                
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • DFRobot SKU: DFR0625
  • Wiki: https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/esp32/get-started-pico-kit.html
  • 34,90 € SU AMAZON
Waveshare
Waveshare
Waveshare RGB Full-Color LED Matrix Panel 2.5mm Pitch 64x32 Pixels Adjustable Brightness Compatible with Raspberry Pi/Raspberry Pi Pico / ESP32 / Arduino
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Compatible with Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino.
  • Chainable design,multi LED matrix panel can be chained together to build a larger panel via HUB75 input/output header.
  • Usage Scenarios,DIY maker desktop or wall mount display, signboard, environment monitor.
  • 29,99 € SU AMAZON
Waveshare
Waveshare
ESP32-C3 Mini Development Board with Pre-soldered Header Based On ESP32-C3FN4 Single-Core Processor,with 2.4GHz Wi-Fi And Bluetooth 5 Support,160MHz Running Frequency, Support C/C++, MicroPython
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Low-power SoC equipped with RISC-V 32-bit single-core processor, up to 160MHz main frequency.
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE).400KB of SRAM and 384KB ROM, and 4MB of onboard Flash memory
  • Castellated module and onboard ceramic antenna, allows soldering direct to carrier boards.Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • Integrated with USB serial port full-speed controller, 15 × GPIO pins allows flexibly configuring pin functions
  • 3 × SPI, 1 × I2C, 2 × UART, 1 × I2S, 2 × ADC, etc.
  • 11,99 € SU AMAZON
Waveshare
Waveshare
ESP32-S3 Scheda di Sviluppo 2.4 GHz Wi-Fi + Bluetooth LE Dual-mode Supporto, ESP32-S3 Microcontrollore Processore Dual-core, Supporto ESP-IDF, Arduino, MicroPython, ecc.
star

68

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • ESP32-S3 microcontroller, 2.4 GHz Wi-Fi development board, adopts ESP32-S3R2 chip with 32-bit LX7 dual-core processor, capable of running at 240 MHz, powerful AI computing capability & reliable security features, designed for AIoT applications
  • WIFI and BLE 5 support, ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 b/g/n) with 40 MHz of bandwidth support, its bluetooth low energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh
  • Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB Flash memory, Type-C connector, easier to use
  • 27 × multi-function GPIO pins, configurable pin function, allows flexible development and integration
  • Supports ESP-IDF, Arduino, MicroPython, etc, provide online comprehensive SDK, dev resources, tutorials to help you easily get started
  • 15,99 € SU AMAZON
esp32-pico esp32 pico d4 esp32-pico-d4 esp32-pico-v3 esp32 c6 pico esp32-pico-kit esp32-pico-devkitm-2 esp32