main logo

Esp32 Display Case

I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento: 27 aprile 2025
Waveshare
Waveshare
Waveshare ESP32-S3 Development Board, 32-Bit LX7 Dual-Core Processor, Integrates GC9A01 Display Driver Chip, With 1.28inch IPS LCD, 240×240 Resolution, Supports WiFi/BT, Display, With CNC Metal Case
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (BLE), with onboard antenna
  • Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory. Type-C connector, keeps it up to date, easier to use
  • Onboard 1.28inch LCD display, IPS panel, 240x240 resolution, 65K color. Adopts CNC metal case with Acrylic dull-polish bottom plate
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture. Onboard 3.7V lithium battery recharge/discharge header and GPIO headers
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios. Integrated with USB serial port full-speed controller, GPIO pins allow flexibly configuring pin functions
  • 29,99 € SU AMAZON
DIYmalls
DIYmalls
DIYmalls 2.8" ESP32-2432S028R ESP32 Display ILI9341 Resistivo Touchscreen 240x320 TFT LCD Modulo ESP 32 Scheda di Sviluppo + Custodia Acrilica per Arduino IDE
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • -ESP32-2432S028R display è una speciale combinazione di scheda di sviluppo ESP32 + 2.8 pollici touch screen resistivo modulo ILI9341.
  • -Il modulo ESP32-2432S028R supporta il caricamento del codice sul display giallo da 2,8 pollici esp 32 tramite IDE o strumento flash esp32.
  • -Il display esp32 da 2,8 pollici ha un requisito rigoroso di tensione. Si prega di alimentarlo tramite caricabatterie da 5 V, invece del PC anche se il PC è 5 V.
  • - Viene fornito con 1pcs esp 32 display 2.8 "modulo, 1pcs dupont femmina a 1.25mm filo, 1pcs USB 2.0 a micro USB cavo dati 1 metro, 1pcs acrilico caso.
  • -Manuale utente disponibile se fare come segue: fare clic su "DIYmalls"(puoi trovare "Venduto da DIYmalls" sotto il pulsante Acquista ora), nella nuova pagina, fai clic su "Fai una domanda".
  • 29,98 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board B, 800×480 Resolution, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, 240MHz Frequency, with Onboard Antenna and Plastic Case
Spedizione gratuita
star

93

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • This version comes with a plastic case. Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BLT 5 (LE), with onboard antenna
  • Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 4.3inch capacitive touch display, 800×480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
  • Onboard voltage regulator, supports 7~36V wide range power supply. Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P battery header and digital isolated IO interfaces, etc.
  • Supports passive and active digital input, with bi-directional optocoupler isolation. Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current
  • Onboard LED indicators for indicating the power and battery recharging status. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios
  • ️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
  • 60,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-C3 0.71inch Round Display Development Board with Protective Case 160×160 Resolution LCD Based on ESP32-C3 Single-Core Processor,SPI Interface,Integrates GC9D01 Display Driver Chip
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • ESP32-C3 0.71″ LCD Development Board with Case,Integrates GC9D01 display Driver Chip
  • ESP32-C3-LCD-0.71 is a microcontroller development board with 2.4GHz WiFi and Bluetooth BLE 5 support.
  • Onboard 0.71inch LCD display which can smoothly run GUI programs such as LVGL.
  • Combined with various peripheral interfaces, suitable for the quick development of the HMI applications based on the ESP32-C3 such as low-power AI emulation eyes, watches, etc.
  • Application Scenarios.Suitable for HMI applications based on the ESP32-C3 such as low-power AI emulation eyes, watches, etc.
  • 22,09 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 2.41inch AMOLED Touch Display Development Board, 600x450, 32-Bit LX7 Dual-Core Processor, Onboard Accelerometer And Gyroscope Sensor, ESP32 With Display with Case
Spedizione gratuita
star

86

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • ESP32-S3-Touch-AMOLED-2.41-B, with case, better protection. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Onboard UART and I2C SH1.0 4PIN connectors, with a reserved 34PIN 2.54mm pitch GPIO header for expandability
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. The device allows switching to an external antenna by resoldering an onboard resistor. Supports capacitive touch function, controlled via I2C interface, with interrupt support
  • Onboard 2.41inch AMOLED display, QSPI interface, 600 450 resolution, 16.7M color. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for motion gesture detection, step counting, and more
  • Onboard PCF85063 RTC chip with a reserved SH1.0 RTC battery header (supports charging) for RTC functionality. Onboard RST button, along with programmable BOOT and PWR buttons for customizable functionality and flexible development
  • Onboard 3.7V MX1.25 Lithium battery recharge/discharge header. Onboard TF card slot, enabling external storage for pictures or files.Onboard USB Type-C port for power supply, program downloading, and debugging, making development more convenient
  • 74,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-C3 0.71inch Round Display Development Board, 160×160 Resolution, Based on ESP32-C3 Single-core Processor, SPI Interface Display, ESP32 with Display, with Protective case
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • ESP32-C3-LCD-0.71 is a microcontroller development board with 2.4GHz WiFi and Bluetooth BLE 5 support. Onboard 0.71inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI applications based on the ESP32-C3 such as low-power AI emulation eyes, watches, etc.
  • Low-power SoC equipped with RISC-V 32-bit single-core processor, up to 160MHz main frequency, Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)
  • 400KB of Static RAM and 384KB ROM, and 4MB of onboard Flash memory, Onboard 0.71inch LCD display, 160×160 resolution, IPS panel, Built-in battery recharge management circuit, reserved VBAT solder joints, for connecting external Lithium battery power supply
  • Adapting some GPIO solder pads for external expansion applications, Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
  • Suitable for HMI applications based on the ESP32-C3 such as low-power AI emulation eyes, watches, etc.
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 22,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 2.41inch AMOLED Touch Display Development Board, 600x450, 32-Bit LX7 Dual-Core Processor, Onboard Accelerometer And Gyroscope Sensor, ESP32 With Display without Case
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • ESP32-S3-Touch-AMOLED-2.41, standard version, without case. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Onboard UART and I2C SH1.0 4PIN connectors, with a reserved 34PIN 2.54mm pitch GPIO header for expandability
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. The device allows switching to an external antenna by resoldering an onboard resistor. Supports capacitive touch function, controlled via I2C interface, with interrupt support
  • Onboard 2.41inch AMOLED display, QSPI interface, 600 450 resolution, 16.7M color. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for motion gesture detection, step counting, and more
  • Onboard PCF85063 RTC chip with a reserved SH1.0 RTC battery header (supports charging) for RTC functionality. Onboard RST button, along with programmable BOOT and PWR buttons for customizable functionality and flexible development
  • Onboard 3.7V MX1.25 Lithium battery recharge/discharge header. Onboard TF card slot, enabling external storage for pictures or files.Onboard USB Type-C port for power supply, program downloading, and debugging, making development more convenient
  • 69,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 1.3inch ESP32-S3 Display Development Board, 240x240 Pixels, Built-In ST7789V2 Display Driver Chip & 6-Axis IMU, 262K Color, SPI, Support 90° Hardware Rotation, without Case & Prism Cube
Spedizione gratuita
star

74

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • ESP32-S3-LCD-1.3(without Case & Prism Cube), a low-cost, high-performance MCU board equipped with 240MHz dual-core processor. It is compact in size, with onboard 1.3inch 262K color LCD display, Lithium battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RGB LCD, and Wi-Fi / BT antenna, which makes it easy for you to develop and integrate it into products quickly.
  • Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna
  • Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, keeps it up to date, easier to use. Onboard 1.3inch 240x240 pixels 262K display for clear and colorful pictures
  • Built-in ST7789V2 display driver, using SPI communication, effectively saving the IO resources. Adapting 13PIN 2.54mm GPIO header for connecting peripherals and debugging, supports flexible configuration of pin functions
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures and other applications. Onboard 3.7V MX1.25 lithium battery recharge / discharge header
  • 23,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 Development Board, With 1.28inch Touch LCD, Compact Size, Accelerometer And Gyroscope Sensor, Display, With CNC Metal Case, Suitable For Various Smart Devices Development
Spedizione gratuita
star

74

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (BLE), with onboard antenna
  • Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory. Onboard 3.7V lithium battery recharge/discharge header and 6 脳 GPIO pins via SH1.0 connector
  • Type-C connector, keeps it up to date, easier to use. Onboard 1.28inch capacitive touch display, 240x240 resolution, 65K color
  • Adopts CNC metal case with Acrylic dull-polish bottom plate. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios. Integrated with USB serial port full-speed controller, GPIO pins allows flexibly configuring pin functions
  • 38,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.43inch AMOLED Display Development Board, 466x466, QSPI Interface Round Display, Onboard Accelerometer And Gyroscope Sensor, RTC Chip, ESP32 With Display, Wihout Case
Spedizione gratuita
star

69

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. Supports switching to use external antenna via resoldering an onboard resistor
  • Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Supports capacitive touch function controlled via I2C interface, with interrupt support. Onboard TF card slot for external TF card storage of pictures or files
  • Onboard 1.43inch AMOLED display, QSPI interface, 466 x 466 resolution, 16.7M color. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.
  • Onboard PCF85063 RTC chip with reserved SH1.0 RTC battery header (supports charging) for RTC function requirement. Onboard RST button and programmable BOOT button for easy custom function development. Onboard 3.7V MX1.25 Lithium battery recharge/discharge header
  • Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use. Onboard UART and I2C SH1.0 4PIN connector, reserved 2 x 14PIN 1.27mm pitch headers, adapting multiple GPIO interfaces.
  • 40,99 € SU AMAZON
esp32 2028 display case esp32 case case display display case display case lego lego display case car display case minifigure display case case display pc case display touch